• Before cleaning, be sure to turn off and unplug the unit.
• Keep the fan clean. Carefully wipe the unit with a soft, damp cloth. Please be very cautious near the motor.
• DO NOT immerse the fan in water and never allow water to drip into the Motor Housing.
• Never use gasoline, benzene or thinner. This will damage the surface of the unit.
• After cleaning, be sure to completely dry the unit with a cloth or towel.

• Your fan can be stored in the off-season.
• Before putting the fan in storage, clean it thoroughly, cover it with a vinyl bag, and store it in a cool and dry place. We recommend using the original (or appropriately sized) box.

• Carefully remove your fan from the box (please save the carton for off-season storage).
• Make sure the unit is in the OFF position before plugging the unit into the outlet.

1. The fan should be fit into a window, which is opened up and down, with a minimum height of 12 inch and minimum width of 22.5 inch, or opened left and right, with minimum height of 22.5 inch and minimum width of 12 inch.
2. To bring fresh air in, place the fan in the window with fan blade facing inside.
3. To exhaust stale air out, place the fan in the window with the fan blade facing outside.
4. Place the fan on the bottom or side of the window, center the fan and pull expander panels up to safe track. Close the window to the top of fan.
5. Plug the power cord into any standard 120V AC, 60Hz outlet. Please make sure the Selector (Speed) Control is in the OFF position. A loose fit between the AC outlet and plug may cause over heating of the plug. Have a qualified electrician to replace the old outlet if the power cord feels extremely hot.
6. When using this fan on floor or table, please lock two (2) legs by snapping the legs into the place of button of cabinet. DO NOT use legs when using in window.
7. 2 Speed Rotary Switches: Select the desire fan speed setting by rotating the switch knob or you may turn the fan off